Make the Connection!
Stainless Steel, Nickel Alloys, Alloy 20, Duplex 2205® and Super Duplex 2507®.
Pipe, Tubing, Fittings, Flanges, Bar, Plate and
Continuous Coil Tubing
We now offer Metric Tubing in Stainless Steel
We offer Tube Fittings by Hoke-Gyrolok®, Parker® and Swagelok®.
316/316L Stainless Steel
UNS S31600/S31603
Grade 316, is an austenitic stainless steel whose major alloying elements include chromium, nickel and molybdenum. The addition of molybdenum (not found in Stainless Steel 304) is the component which gives Stainless Steel 316 increased resistance in highly corrosive surroundings such as salt water or chloride environments. 316 Stainless offers better creep resistance at higher temperatures and greater strength than 304 Stainless. In the annealed condition, 316 is non-magnetic but can become slightly magnetic if extensively cold worked, further annealing would be necessary to correct this. 316 cannot be hardened using thermal treatment. However, by cold working, hardness and strength can be significantly increased.
UNS S31600/S31603
Grade 316, is an austenitic stainless steel whose major alloying elements include chromium, nickel and molybdenum. The addition of molybdenum (not found in Stainless Steel 304) is the component which gives Stainless Steel 316 increased resistance in highly corrosive surroundings such as salt water or chloride environments. 316 Stainless offers better creep resistance at higher temperatures and greater strength than 304 Stainless. In the annealed condition, 316 is non-magnetic but can become slightly magnetic if extensively cold worked, further annealing would be necessary to correct this. 316 cannot be hardened using thermal treatment. However, by cold working, hardness and strength can be significantly increased.
Available from Inventory
Pipe – Seamless and Welded
Tubing – Seamless and Welded
Continuous Coil Tubing – Seamless and Welded
Fittings – Butt Weld, Socket Weld
Flanges
½” Thru 12”
Schedules 10s, 40s, 80s and 160
Pressure Fittings - Threaded
1/4” Thru 2”
150#, 300#, 3000# and 6000#
Bar- Round, Flat and Hex
Plate and Sheet
Specifications
Pipe – ASTM/ASME A/SA312, ASTM/ASME A/SA 358
Tube- ASTM A213, A249, A269, A270, A511
Butt-Weld Fittings – ASTM A-403 WPW, WPX, WPS
Flanges – ASTM A182 Pressure Fittings - A/SA182
Chemical Composition %
|
C |
Cr |
Mn |
Mo |
Ni |
P |
S |
Si |
|
Max |
|
Max |
|
|
Max |
Max |
Max |
|
0.035 |
16.0-20.0 |
2.00 |
2.0-3.0 |
10.0-15.0 |
0.040 |
0.030 |
0.75 |
All information above is not intended for Design purposes and is not guaranteed.